| Transmission [i] | 2,5:1 (16/40) |
| Module | 1 |
| No. of Teeth | 40 |
| da [mm] | 40,5 |
| d [mm] | 40 |
| ND [mm] | 25 |
| NL [mm] | 9 |
| L1 [mm] | 13 |
| L [mm] | 14,8 |
| S [mm] | 12,6 |
| b [mm] | 6,5 |
| B H7 [mm] | 8 |
| E [mm] | 20 |
| Admissible MD [Nm] | 0,225 |
| Weight [g] | 65 |
| Corresponding Counter Wheel [ArticleNo.] | 36056400 |
Bevel gear made of steel module 1 40 teeth i=2,5:1 milled SKU: 36056500
Bevel Gears Steel Straight Tooth System ratio 2.5:1
Bevel gear made of steel module 1 40 teeth i=2,5:1 milled SKU: 36056500
₹3,301.25
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
With crowned, milled teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Out of stock
| Weight | 0.065 g |
|---|---|
| Dimensions | 40 × 14 × 40 cm |
