| Transmission [i] | 2,5:1 (16/40) |
| Module | 4 |
| No. of Teeth | 16 |
| da [mm] | 71,8 |
| d [mm] | 64 |
| ND [mm] | 50 |
| NL [mm] | 12 |
| L1 [mm] | 41 |
| L [mm] | 43,8 |
| S [mm] | 16,5 |
| b [mm] | 30 |
| B H7 [mm] | 20 |
| E [mm] | 95 |
| Admissible MD [Nm] | 20,9 |
| Weight [g] | 600 |
| Corresponding Counter Wheel [ArticleNo.] | 36186500 |
Bevel gear made of steel module 4 16 teeth i=2.5:1 milled SKU: 36186400
Bevel Gears Steel Straight Tooth System ratio 2.5:1
Bevel gear made of steel module 4 16 teeth i=2.5:1 milled SKU: 36186400
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
With crowned, milled teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Description
Additional information
| Weight | 0.6 g |
|---|---|
| Dimensions | 71 × 43 × 71 cm |
