| No. of Teeth | 15 |
| b [mm] | 17 |
| da [mm] | 42,5 |
| d [mm] | 37,5 |
| L [mm] | 30 |
| E [mm] | 27 |
| c [mm] | 7 |
| ND [mm] | 20 |
| B H9 [mm] | 10 |
| Admissible MD [Ncm] | 216 |
| Weight [g] | 20,7 |
Spur gear made of polyacetal resin die-cast with hub module 2.5 15 teeth tooth width 17mm outside diameter 42,5mm SKU: 28701500
Spur Gears Polyacetal Module 2.5
Spur gear made of polyacetal resin die-cast with hub module 2.5 15 teeth tooth width 17mm outside diameter 42,5mm SKU: 28701500
₹897.50
Material: Polyacetal resin die-cast. Bores machined. Pressure
angle 20°. With high hardness and low friction coefficient these plastic
gears can be used in various set-ups, even under water.
Note Regarding the Machining
Inside these die-cast parts
are some cavities caused by production. These parts should therefore not
be drilled too deep. With larger bores or when grooving the cavities
might become visible. This often does not affect the functionality.
Out of stock
| Weight | 0.021 g |
|---|---|
| Dimensions | 42.5 × 30 × 42.5 cm |
