| No. of Teeth | 35 |
| b [mm] | 12 |
| da [mm] | 55,5 |
| d [mm] | 52,5 |
| L [mm] | 23 |
| E [mm] | 41,5 |
| c [mm] | 5 |
| ND [mm] | 24 |
| B H9 [mm] | 10 |
| Admissible MD [Ncm] | 324 |
| Weight [g] | 31,9 |
Spur gear made of polyacetal resin die-cast with hub module 1.5 35 teeth tooth width 12mm outside diameter 55.5mm SKU: 28503500
Spur Gears Polyacetal Module 1.5
Spur gear made of polyacetal resin die-cast with hub module 1.5 35 teeth tooth width 12mm outside diameter 55.5mm SKU: 28503500
Material: Acetal resin die-cast.
Bores machined.
Pressure angle 20°.
With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water.
Note Regarding the Machining
Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality.
Description
Additional information
| Weight | 0.031 g |
|---|---|
| Dimensions | 55 × 23 × 55 cm |
