| No. of Teeth | 38 |
| b [mm] | 3 |
| da [mm] | 20,0 |
| d [mm] | 19,0 |
| L [mm] | 10 |
| E [mm] | – |
| c [mm] | – |
| ND [mm] | 12 |
| B H9 [mm] | 4 |
| Admissible MD [Ncm] | 8,5 |
| Weight [g] | 2,01 |
Spur gear made of polyacetal resin die-cast with hub module 0.5 38 teeth tooth width 3mm outside diameter 20mm SKU: 28103800
Spur Gears Polyacetal Module 0.5
Spur gear made of polyacetal resin die-cast with hub module 0.5 38 teeth tooth width 3mm outside diameter 20mm SKU: 28103800
₹95.00
Material: Polyacetal resin die-cast. Bores machined. Pressure
angle 20°. With high hardness and low friction coefficient these plastic
gears can be used in various set-ups, even under water. Note Regarding
the Machining Inside these die-cast parts are some cavities caused by
production. These parts should therefore not be drilled too deep. With
larger bores or when grooving the cavities might become visible. This
often does not affect the functionality.
Out of stock
| Weight | 0.002 g |
|---|---|
| Dimensions | 20 × 10 × 20 cm |
