| d [mm] | 38 |
| D [mm] | 65 |
| L [mm] | 20 |
| L2 [mm] | 26 |
| Transferable Torque T [Nm] | 650 |
| Axial Force Fax [kN] | 26 |
| Surface Pressure Shaft PW [N/mm²] | 107 |
| Surface Pressure Hub PN [N/mm²] | 62 |
| Clamping Bolts DIN 912 [N. x Typ] | 14 x M6 |
| Torque TA [Nm] | 8 |
| Weight [kg] | 0,33 |
Locking assembly COM-A stainless steel 1.4401 bore 38mm size 38-65 SKU: 61599538
Locking Assemblies COM-A Stainless new sizes 14 - 19 mm
Locking assembly COM-A stainless steel 1.4401 bore 38mm size 38-65 SKU: 61599538
₹7,250.00
Material: Steel.
- For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
- For low torques.
- Very short version.
- Also suitable for small hub diameters.
- Not self-centering.
- Not self-locking.
- Axial movement during mounting.
Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.
Material: Stainless steel 1.4401 (SS316).
Clamping bush for lower torques; not self-centering.
Fit: Shaft h8, Hub H8.
Mounting: Slightly oil the clamping set before mounting, do not
use molibdenum disulphide or grease. Tighten the screws evenly and
crosswise in several steps. Demounting: Due to the cone angle,
the clamping set is usually released once all screws have been fully
unfastened. There a three large threads cut into the front ring, which
serve to remove this ring.
Ts – Fastening Torque
T – Transmittable Torque
F – Transmittable Axial Force
P – Surface Pressure onto Hub
### new sizes 14 – 19 mm ###
Out of stock
| Weight | 0.32 g |
|---|---|
| Dimensions | 65 × 26 × 65 cm |
