| Transmission [i] | 3:1 (16/48) |
| Module | 3 |
| No. of Teeth | 48 |
| da [mm] | 145,9 |
| d [mm] | 144 |
| ND [mm] | 70 |
| NL [mm] | 18 |
| L1 [mm] | 34 |
| L [mm] | 38,7 |
| S [mm] | 32,0 |
| b [mm] | 25 |
| B H7 [mm] | 30 |
| E [mm] | 53 |
| Admissible MD [Nm] | 30,0 |
| Weight [g] | 2300 |
| Corresponding Counter Wheel [ArticleNo.] | 36148000 |
Bevel gear made of steel module 3 48 teeth i=3:1 milled SKU: 36148100
Bevel Gears Steel Straight Tooth System ratio 3:1
Bevel gear made of steel module 3 48 teeth i=3:1 milled SKU: 36148100
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
Up to module 5 with crowned, milled teeth.
From module 6 with planed teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Description
Additional information
| Weight | 2.203 g |
|---|---|
| Dimensions | 145 × 38 × 145 cm |
