| Transmission [i] | 1:1 (40/40) |
| Module | 1,5 |
| No. of Teeth | 40 |
| da [mm] | 62,1 |
| d [mm] | 60 |
| ND [mm] | 40 |
| NL [mm] | 12 |
| L1 [mm] | 25 |
| L [mm] | 27,7 |
| S [mm] | 19,1 |
| b [mm] | 12,7 |
| B H7 [mm] | 15 |
| E [mm] | 48 |
| Admissible MD [Nm] | 2,46 |
| Weight [g] | 310 |
| Corresponding Counter Wheel [ArticleNo.] | 36072600 |
Bevel gear made of steel module 1.5 40 teeth i=1:1 milled SKU: 36072600
Bevel Gears Steel Straight Tooth System ratio 1:1
Bevel gear made of steel module 1.5 40 teeth i=1:1 milled SKU: 36072600
₹3,960.00
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
Up to module 5 with crowned, milled teeth.
From module 6 with planed teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth.
Out of stock
| Weight | 0.313 g |
|---|---|
| Dimensions | 62 × 27 × 62 cm |
