| Transmission [i] | 4:1 (10/40) |
| Module | 1 |
| No. of Teeth | 10 |
| da [mm] | 12 |
| d [mm] | 10 |
| ND [mm] | 7,8 |
| NL [mm] | 9,3 |
| L1 [mm] | 17,7 |
| L [mm] | 17,7 |
| b [mm] | 8,2 |
| B [mm] | 4 |
| E [mm] | 30,1 |
| Admissible MD [Ncm] | 4,7 |
| Weight [g] | 0,8 |
| Corresponding Counter Wheel [ArticleNo.] | 35558901 |
Bevel gear made of polyketone die-cast module 1 10 teeth i=4:1 bore 4mm SKU: 35558801
Bevel Gears Polyketone Resin Ratio 1:1 - 5:1
Bevel gear made of polyketone die-cast module 1 10 teeth i=4:1 bore 4mm SKU: 35558801
Material: Polyketone resin, die-cast, ivory-colored.
Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5
machined.
Lower friction leads to much larger lifespan, even without lubrication.
Much higher safety against tooth breaking, specially at longterm usage.
Temperature Range: -40°C to +140°C, due to the load.
Note for ordering: The bevel gears only run as a pair at the
stated ratio. These gears are sold singulary, not by pair. For a pair of
bevel gears, you have to order two matching gears of the same module and
ratio. At ratio 1:1, you need two pieces of the same number of teeth. At
ratio uneven 1:1, you need two pieces with a different number of teeth
of the same ratio.
Description
Additional information
| Weight | 0.008 g |
|---|---|
| Dimensions | 12 × 17.7 × 12 cm |
