| d [mm] | 16 |
| D [mm] | 24 |
| L [mm] | 36 |
| A [mm] | 29 |
| L1 [mm] | 16 |
| L2 [mm] | 42 |
| D1 [mm] | 45 |
| Transferable Torque T [Nm] | 78 |
| Axial Force Fax [kN] | 10 |
| Surface Pressure Shaft PW [N/mm²] | 101 |
| Surface Pressure Hub PN [N/mm²] | 67 |
| Clamping Bolts DIN 912 [N. x Typ] | 4 x M6 |
| Torque TA [Nm] | 8 |
| Weight [kg] | 0,22 |
Locking assembly COM-B stainless steel 1.4401 bore 16mm size 16-24 SKU: 61599616
Locking Assemblies COM-B Stainless boreholes 10 - 50 mm
Locking assembly COM-B stainless steel 1.4401 bore 16mm size 16-24 SKU: 61599616
₹7,261.25
Material: Stainless steel 1.4401 (AISI 316).
Self-centering clamping bush for small hub diametres. For low torques.
Self-locking. No axial movement during mounting.
Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16
µm. Mounting: Slightly oil the clamping set before mounting,
do not use molibdenum disulphide or grease. Tighten the screws evenly
and crosswise in several steps.
Demounting: Remove all tensioning screws and screw them into the
(usually unused) forcing thread of the front flange, until the flange is
released.
Out of stock
| Weight | 0.218 g |
|---|---|
| Dimensions | 45 × 42 × 45 cm |
