| d [mm] | 25 |
| D [mm] | 38 |
| L [mm] | 35 |
| L1 [mm] | 25 |
| B [mm] | 8 |
| Transmissible Torque T [Nm] | 415 |
| Transmissible Axial Force Fax [kN] | 33 |
| Surface Pressure Hub [N/mm²] | 93 |
| Wrench Width SW [mm] | 36 |
| Tightening Torque TA [Nm] | 185 |
| Weight [g] | 159 |
Locking assembly TT bore 25mm size 25-38 SKU: 61550125
Locking Assemblies TT boreholes 17 - 35 mm
Locking assembly TT bore 25mm size 25-38 SKU: 61550125
₹4,432.50
Material: Steel.
- For fixing a hub (e.g. drive wheel,
- rotor or similar) on a shaft.
- For high torques.
- Self-centering.
-
Axial offset during mounting (can be compensated by correct
positioning).
Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting
It is essential to degrease the shaft and hub. Install clamping sets
nearly completely degreased. Tighten the nut with a torque wrench with
hexagon socket to the torque TA.
Out of stock
| Weight | 0.157 g |
|---|---|
| Dimensions | 42 × 38 × 42 cm |
