| d [mm] | 16 |
| D [mm] | 26 |
| L [mm] | 29 |
| L1 [mm] | 16 |
| B [mm] | 5 |
| Transmissible Torque T [Nm] | 135 |
| Transmissible Axial Force Fax [kN] | 17 |
| Surface Pressure Hub [N/mm²] | 107 |
| Wrench Width SW [mm] | 22 |
| Tightening Torque TA [Nm] | 66 |
| Weight [g] | 59 |
Locking assembly TT bore 16mm size 16-26 SKU: 61550116
Locking Assemblies TT boreholes 3 - 16 mm
Locking assembly TT bore 16mm size 16-26 SKU: 61550116
Material: Steel.
- For fixing a hub (e.g. drive wheel,
- rotor or similar) on a shaft.
- For high torques.
- Self-centering.
-
Axial offset during mounting (can be compensated by correct
positioning).
Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting
It is essential to degrease the shaft and hub. Install clamping sets
nearly completely degreased. Tighten the nut with a torque wrench with
hexagon socket to the torque TA.
Description
Additional information
| Weight | 0.066 g |
|---|---|
| Dimensions | 26 × 29 × 26 cm |
