Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance.

Surface pressure max.:
18 N/mm², dependant on sliding speed and bearing temperature

Sliding Speed:2 m/s
Lubrication: usually not required
Bearing clearance: about 0.01 mm per mm shaft-Ø
Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well.

Coefficient of linear expansion: 8 x 10^-5
Moisture absorption max.: 7.5%
Moisture absorption at 20°C and 50% rel. humidity: 2.4%

Mounting hole: tolerance H7