Version C: In this version the spindle is fixed to the worm gear.
The axial movement is taken over by the ball screw nut running outside
the gear unit.

Housing: Made from aluminium alloy in die-cast version. All sides
machined. As standard filled with lubricant.

Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the
high efficiency (low friction between spindle and nut), ball screws are
not self-locking. To prevent runback, a brake motor should be fitted,
for example.

Spindle: Ball screw material Cf53 rolled, induction hardened 60
±2 HRC and polished.

The product numbers only refer to the basic gear units without
spindle and accessories. Please ask for the price of the complete
unit including spindle and accessories as, e.g., flange plate/travelling
nut, bellow or coil spring cover, fastening strips.

You will find further dimensions on our catalogue page.

¹⁾ Efficiency. Values in brackets for version with higher
transmission ratio (slow-running version).

²⁾ Stroke pro full rotation of the input shaft.

³⁾ Required torque at max. load (only under optimum
conditions).