| Ausführung | A |
| Transmission | 10 : 1 |
| Selflocking | nein |
| Output torque at 100min 1 [Nm] | 20 |
| Drive power at 100min 1 [W] | 36,1 |
| Efficiency ca. [eta] | 0,58 |
| Weight [g] | 863 |
Worm gear unit KES 30 version A center distance 30mm ratio 10:1 output hollow shaft 14mm SKU: 42003010
Worm Gear Units KES 30 up to 20 Nm i=5:1 bis 64:1
Worm gear unit KES 30 version A center distance 30mm ratio 10:1 output hollow shaft 14mm SKU: 42003010
₹31,290.00
Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.
One size with center distance 30mm, in 8 ratios.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.
Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.
Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.
Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C.
Description
Additional information
| Weight | 0.001 g |
|---|---|
| Dimensions | 96 × 40 × 80 cm |
