General: Miniaturised right-angle drives for light duty. Suitable
for manual and short term drive applications. Housing: Gear cases are
injection moulded in filled polyamide 6.6 for low moisture take up,
low thermal expansion and high rigidity. Two counter-bored clearance
holes for conventional chassis mounting and a tapped insert below each
shaft for vertical mounting. Gearing: Straight cut gears, max. backlash
2°. Ratio i = 1 : 1. Shaft diamter 4mm. Maximum speed 1000 rpm. Gearbox
and bearing lubricated for life.

Product No. 410 000 00, Version A: Hardened steel gears bonded to
ground and hardened steel shafts. Sintered bronze bearing system.
Electrical insulation between shafts and housing. Max. torque 0.68 Nm.
Weight: 0.041 kg.

Product No. 410 001 00, Version B: Polyacetal gears moulded onto
ground and hardened steel shafts. Sintered bronze bearing system.
Electrical insulation between input/output shaft and between shafts and
housing. Max. torque 0.11 Nm. Weight: 0.037 kg.