| Transmission [i] | 2:1 (15/30) |
| Module | 1 |
| No. of Teeth | 30 |
| da [mm] | 30,6 |
| d [mm] | 30 |
| ND [mm] | 20 |
| NL [mm] | 9,0 |
| L1 [mm] | 13 |
| L [mm] | 15,1 |
| S [mm] | 13,1 |
| b [mm] | 5,0 |
| B H7 [mm] | 5 |
| E [mm] | 20 |
| Admissible MD [Nm] | 0,16 |
| Weight [kg] | 0,040 |
| Corresponding Counter Wheel [ArticleNo.] | 36099556 |
Bevel gear made of stainless steel 1.4305 module 1 30 teeth i=2:1 SKU: 36099557
Bevel Gears Stainless Steel Straight Tooth System Ratio 1:1 - 4:1
Bevel gear made of stainless steel 1.4305 module 1 30 teeth i=2:1 SKU: 36099557
₹5,115.00
Material: Stainless steel 1.4305 (AISI 303).
Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled
teeth. Shaft angle 90º. The bevel gears only run as a pair at
the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair.
For a pair of bevel gears, you have to order two matching gears of the
same module and ratio. At ratio 1:1, you need two pieces of the same
number of teeth. At ratio uneven 1:1, you need two pieces with a
different number of teeth of the same ratio.
Out of stock
| Weight | 0.014 g |
|---|---|
| Dimensions | 30 × 15 × 30 cm |
