| Transmission [i] | 1:1 (20/20) |
| Module | 1 |
| No. of Teeth | 20 |
| da [mm] | 21,4 |
| d [mm] | 20 |
| ND [mm] | 15,0 |
| NL [mm] | 5,0 |
| L1 [mm] | 9,0 |
| L [mm] | 10,4 |
| S [mm] | 7,8 |
| b [mm] | 4 |
| B H7 [mm] | 5 |
| E [mm] | 17,1 |
| Admissible MD [Ncm] | 13,0 |
| Weight [g] | 15 |
| Corresponding Counter Wheel [ArticleNo.] | 35051100 |
Bevel gear made of brass Ms58 module 1 20 teeth i=1:1 milled SKU: 35051100
Bevel Gears Made of Brass Ratio 1:1 - 4:1
Bevel gear made of brass Ms58 module 1 20 teeth i=1:1 milled SKU: 35051100
₹1,358.75
Material:Brass Ms58 (2.0401).
Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at
the stated ratio.
Note for ordering: These gears are sold singulary, not by pair.
For a pair of bevel gears, you have to order two matching gears of the
same module and ratio. At ratio 1:1, you need two pieces of the same
number of teeth. At ratio uneven 1:1, you need two pieces with a
different number of teeth of the same ratio.
Out of stock
| Weight | 0.015 g |
|---|---|
| Dimensions | 21 × 10 × 21 cm |
