| Thread Type | rechts |
| d H7 [mm] | 30 |
| B 0,1 [mm] | 37 |
| C1 [mm] | 25 |
| d1 [mm] | 34,8 |
| d2 [mm] | 70 |
| h [mm] | 110 |
| l1 [mm] | 71 |
| Thread ISO DIN 13 6H/ 6g M [mm] | M30x2 |
| Thread Slope[mm] | 2,0 |
| Tipping Angle Alpha [°] | 17 |
| Weight [g] | 1030 |
Rod end GS DIN ISO 12240-4 series K external thread M30x2 right == Initial lubrication required before use == SKU: 63223000
Rod ends GS DIN ISO 12240-4 K re-lubricateable external thread
Rod end GS DIN ISO 12240-4 series K external thread M30x2 right == Initial lubrication required before use == SKU: 63223000
₹9,428.75
Material: Outer part: Zinc-plated. Boreholes up to 12mm:
free-cutting steel, turned. From boreholes 14mm: Steel C22, forged.
Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and
polished. Bearing race: Special brass CuZn40Als. Wide version.
Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread
either right-handed or left-handed.
- Heavy-duty rods end for high radial and axial alternating loads.
- Steel on high-duty brass.
- Can be re-lubricated (only from size 6mm).
- Sliding speed up to 60 m/min.
Initial lubrication required before use
Out of stock
| Weight | 1.06 g |
|---|---|
| Dimensions | 70 × 37 × 145 cm |
