| Thread Type | links |
| d H7 [mm] | 35 |
| B 0,1 [mm] | 43 |
| C1 [mm] | 28 |
| d1 [mm] | 37,7 |
| d2 [mm] | 80 |
| d3 [mm] | 46 |
| d4 [mm] | 58 |
| h1 [mm] | 125 |
| l3 +0/1,0 [mm] | 58 |
| Thread ISO DIN 13 6H/ 6g M [mm] | M36x2 |
| Thread Slope[mm] | 2,0 |
| W [mm] | 50 |
| Tipping Angle Alpha [°] | 19 |
| Weight [g] | 1600 |
Rod end GS DIN ISO 12240-4 series K internal thread M36x2 left == Initial lubrication required before use == SKU: 63213500
Rod ends GS DIN ISO 12240-4 K re-lubricateable internal thread
Rod end GS DIN ISO 12240-4 series K internal thread M36x2 left == Initial lubrication required before use == SKU: 63213500
Material: Outer part: Zinc-plated. Boreholes up to 12mm:
free-cutting steel, turned. From boreholes 14mm: Steel C22, forged.
Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and
polished. Bearing race: Special brass CuZn40Als. Wide version.
Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread
either right-handed or left-handed.
- Heavy-duty rod ends for high radial and axial alternating loads.
- Steel on high-duty brass.
- Can be re-lubricated (only from size 5mm).
- Sliding speed up to 60 m/min.
Initial lubrication required before use
Description
Additional information
| Weight | 1.687 g |
|---|---|
| Dimensions | 80 × 50 × 165 cm |
