| Thread Type | links |
| d H7 [mm] | 2 |
| B 0,1 [mm] | 4,5 |
| C1 [mm] | 3,6 |
| d1 [mm] | 2,6 |
| d2 [mm] | 9 |
| d3 [mm] | 3,8 |
| d4 [mm] | 4,5 |
| h1 [mm] | 16 |
| l3 +0/1,0 [mm] | 7 |
| Thread ISO DIN 13 6H/ 6g M [mm] | M2 |
| Thread Slope[mm] | 0,4 |
| W [mm] | 4 |
| Tipping Angle Alpha [°] | 16 |
| Weight [g] | 3 |
Rod end GS DIN ISO 12240-4 series K internal thread M2 left == Initial lubrication required before use == SKU: 63210200
Rod ends GS DIN ISO 12240-4 K re-lubricateable internal thread
Rod end GS DIN ISO 12240-4 series K internal thread M2 left == Initial lubrication required before use == SKU: 63210200
₹2,060.00
Material: Outer part: Zinc-plated. Boreholes up to 12mm:
free-cutting steel, turned. From boreholes 14mm: Steel C22, forged.
Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and
polished. Bearing race: Special brass CuZn40Als. Wide version.
Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread
either right-handed or left-handed.
- Heavy-duty rod ends for high radial and axial alternating loads.
- Steel on high-duty brass.
- Can be re-lubricated (only from size 5mm).
- Sliding speed up to 60 m/min.
Initial lubrication required before use
Out of stock
| Weight | 0.006 g |
|---|---|
| Dimensions | 9 × 4 × 21 cm |
