| Size | 250-1 |
| Disc springs [quantity] | 1 |
| Torque [Nm] | 7 – 34 |
| Speed [min 1] | 3000 |
| Pilot Bore d [mm] | 10 |
| Bore d max. [mm] | 22 |
| OuterØ D [mm] | 64 |
| B [mm] | 16 |
| Bore of Sprocket [mm H8] | 41,33 |
| b max. [mm] | 9 |
| Standard Bush Length [mm] | 10,3 |
| Alternative Bush Length [mm] | 12,2 |
| Alternative Bush Length [mm] | 14 |
| F [mm] | 5 |
| s [mm] | 4,0 |
| L [mm] | 48 |
| SW [mm] | SW 50 |
| DM [mm] | – |
| M [mm] | M35 |
| G [mm] | M5 |
| Weight [kg] | 0,70 |
Sliding hub FS torque adjustable 7-34 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm SKU: 61201000
Sliding Hubs FS
Sliding hub FS torque adjustable 7-34 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm SKU: 61201000
Material: Hub: Steel, zinc-plated and passivated. Spring: Steel,
black. The sliding hubs can be delivered ex stock, pre-drilled with
standard bush length. Required bush length: The required bush length
depends on the width of the component to be joined. Up to Prod. No. 612
006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From
Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush
lengths and customized bores or feather-key grooves against extra charge.
At sizes 120 and 180, the lock washer is a round plate, without edges.
Description
Additional information
| Weight | 0.685 g |
|---|---|
| Dimensions | 64 × 48 × 64 cm |
