| Size | 120-1 |
| Disc springs [quantity] | 2 |
| Torque [Nm] | 0,5 – 5 |
| Speed [min 1] | 10000 |
| Pilot Bore d [mm] | 3,7 |
| Bore d max. [mm] | 10 |
| OuterØ D [mm] | 30 |
| B [mm] | 8,5 |
| Bore of Sprocket [mm H8] | 21,00 |
| b max. [mm] | 6 |
| Standard Bush Length [mm] | 4,2 |
| Alternative Bush Length [mm] | – |
| Alternative Bush Length [mm] | – |
| F [mm] | 2 |
| s [mm] | 2,5 |
| L [mm] | 31 |
| SW [mm] | SW 27 |
| DM [mm] | – |
| M [mm] | M16 |
| G [mm] | M4 |
| Weight [kg] | 0,15 |
Sliding hub FS torque adjustable 0.5-5 Nm with pilot bore outer diameter 30mm with 2 disc springs max. bore: 10mm bush length 4.2mm lock washer without edges SKU: 61200000
Sliding Hubs FS
Sliding hub FS torque adjustable 0.5-5 Nm with pilot bore outer diameter 30mm with 2 disc springs max. bore: 10mm bush length 4.2mm lock washer without edges SKU: 61200000
₹3,662.50
Material: Hub: Steel, zinc-plated and passivated. Spring: Steel,
black. The sliding hubs can be delivered ex stock, pre-drilled with
standard bush length. Required bush length: The required bush length
depends on the width of the component to be joined. Up to Prod. No. 612
006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From
Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush
lengths and customized bores or feather-key grooves against extra charge.
At sizes 120 and 180, the lock washer is a round plate, without edges.
Out of stock
| Weight | 0.15 g |
|---|---|
| Dimensions | 30 × 31 × 30 cm |
