| Transmission [i] | 4:1 (15/60) |
| Module | 4 |
| No. of Teeth | 60 |
| da [mm] | 242 |
| d [mm] | 240 |
| ND [mm] | 90 |
| NL [mm] | 20 |
| L1 [mm] | 41 |
| L [mm] | 50,1 |
| S [mm] | 44,0 |
| b [mm] | 30 |
| B H7 [mm] | 30 |
| E [mm] | 70 |
| Admissible MD [Nm] | 86,8 |
| Weight [g] | 8300 |
| Corresponding Counter Wheel [ArticleNo.] | 36189200 |
Bevel gear made of steel module 4 60 teeth i=4:1 milled SKU: 36189300
Bevel Gears Steel Straight Tooth System ratio 4:1
Bevel gear made of steel module 4 60 teeth i=4:1 milled SKU: 36189300
₹22,663.75
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
With crowned, milled teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Out of stock
| Weight | 8.3 g |
|---|---|
| Dimensions | 242 × 50 × 242 cm |
