| Transmission [i] | 2,5:1 (18/45) |
| Module | 3 |
| No. of Teeth | 45 |
| da [mm] | 137,7 |
| d [mm] | 135 |
| ND [mm] | 70 |
| NL [mm] | 18 |
| L1 [mm] | 34 |
| L [mm] | 39,0 |
| S [mm] | 30,9 |
| b [mm] | 25 |
| B H7 [mm] | 30 |
| E [mm] | 55 |
| Admissible MD [Nm] | 32,0 |
| Weight [g] | 1900 |
| Corresponding Counter Wheel [ArticleNo.] | 36146800 |
Bevel gear made of steel module 3 45 teeth i=2.5:1 milled SKU: 36146900
Bevel Gears Steel Straight Tooth System ratio 2.5:1
Bevel gear made of steel module 3 45 teeth i=2.5:1 milled SKU: 36146900
₹11,568.75
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
With crowned, milled teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Out of stock
| Weight | 1.95 g |
|---|---|
| Dimensions | 137 × 39 × 137 cm |
