| Transmission [i] | 4:1 (15/60) |
| Module | 1,5 |
| No. of Teeth | 15 |
| da [mm] | 26,7 |
| d [mm] | 22,5 |
| ND [mm] | 18 |
| NL [mm] | 14,4 |
| L1 [mm] | 28 |
| L [mm] | 28,9 |
| S [mm] | 15,5 |
| b [mm] | 13,9 |
| B H7 [mm] | 8 |
| E [mm] | 60 |
| Admissible MD [Nm] | 0,41 |
| Weight [g] | 42 |
| Corresponding Counter Wheel [ArticleNo.] | 36079300 |
Bevel gear made of steel module 1.5 15 teeth i=4:1 milled SKU: 36079200
Bevel Gears Steel Straight Tooth System ratio 4:1
Bevel gear made of steel module 1.5 15 teeth i=4:1 milled SKU: 36079200
₹2,668.75
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
With crowned, milled teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Description
Additional information
| Weight | 0.042 g |
|---|---|
| Dimensions | 26 × 28 × 26 cm |
