| Transmission [i] | 3:1 (16/48) |
| Module | 1,5 |
| No. of Teeth | 48 |
| da [mm] | 72,6 |
| d [mm] | 72 |
| ND [mm] | 50 |
| NL [mm] | 12 |
| L1 [mm] | 20 |
| L [mm] | 24,1 |
| S [mm] | 20,8 |
| b [mm] | 11,4 |
| B H7 [mm] | 15 |
| E [mm] | 32 |
| Admissible MD [Nm] | 1,14 |
| Weight [g] | 405 |
| Corresponding Counter Wheel [ArticleNo.] | 36078000 |
Bevel gear made of steel module 1.5 48 teeth i=3:1 milled SKU: 36078100
Bevel Gears Steel Straight Tooth System ratio 3:1
Bevel gear made of steel module 1.5 48 teeth i=3:1 milled SKU: 36078100
₹4,495.00
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
Up to module 5 with crowned, milled teeth.
From module 6 with planed teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Out of stock
| Weight | 0.405 g |
|---|---|
| Dimensions | 72 × 24 × 72 cm |
