| Transmission [i] | 2:1 (15/30) |
| Module | 1,5 |
| No. of Teeth | 15 |
| da [mm] | 26,1 |
| d [mm] | 22,5 |
| ND [mm] | 18 |
| NL [mm] | 6,5 |
| L1 [mm] | 13 |
| L [mm] | 14,8 |
| S [mm] | 8,4 |
| b [mm] | 7,6 |
| B H7 [mm] | 8 |
| E [mm] | 30 |
| Admissible MD [Nm] | 0,22 |
| Weight [g] | 26 |
| Corresponding Counter Wheel [ArticleNo.] | 36075700 |
Bevel gear made of steel module 1.5 15 teeth i=2:1 milled SKU: 36075600
Bevel Gears Steel Straight Tooth System ratio 2:1
Bevel gear made of steel module 1.5 15 teeth i=2:1 milled SKU: 36075600
₹1,798.75
Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
Up to module 5 with crowned, milled teeth.
From module 6 with planed teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Out of stock
| Weight | 0.026 g |
|---|---|
| Dimensions | 26 × 14 × 26 cm |
