| Transmission [i] | 2:1 (20/40) |
| Module | 0,5 |
| No. of Teeth | 40 |
| da [mm] | 20,3 |
| d [mm] | 20 |
| ND [mm] | 12 |
| NL [mm] | 5,0 |
| L1 [mm] | 7,5 |
| L [mm] | 8,4 |
| S [mm] | 7,1 |
| b [mm] | 3 |
| B H7 [mm] | 4 |
| E [mm] | 11,83 |
| Admissible MD [Nm] | 0,034 |
| Weight [g] | 8 |
| Corresponding Counter Wheel [ArticleNo.] | 36026000 |
Bevel gear made of steel module 0.5 40 teeth i=2:1 milled SKU: 36026100
Bevel Gears Steel Straight Tooth System ratio 2:1
Bevel gear made of steel module 0.5 40 teeth i=2:1 milled SKU: 36026100
₹2,012.50
Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
Up to module 5 with crowned, milled teeth.
From module 6 with planed teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Out of stock
| Weight | 0.008 g |
|---|---|
| Dimensions | 20 × 8 × 20 cm |
