| Transmission [i] | 1,5:1 (20/30) |
| Module | 0,5 |
| No. of Teeth | 20 |
| da [mm] | 11,0 |
| d [mm] | 10 |
| ND [mm] | 8 |
| NL [mm] | 3,5 |
| L1 [mm] | 6,5 |
| L [mm] | 7,1 |
| S [mm] | 4,7 |
| b [mm] | 3 |
| B H7 [mm] | 4 |
| E [mm] | 11,9 |
| Admissible MD [Nm] | 0,014 |
| Weight [g] | 2 |
| Corresponding Counter Wheel [ArticleNo.] | 36025300 |
Bevel gear made of steel module 0.5 20 teeth i=1:5 milled SKU: 36025200
Bevel Gears Steel Straight Tooth System ratio 1.5:1
Bevel gear made of steel module 0.5 20 teeth i=1:5 milled SKU: 36025200
₹2,133.00
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
With crowned, milled teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Out of stock
| Weight | 0.002 g |
|---|---|
| Dimensions | 11 × 7 × 11 cm |
