| No. of Teeth | 33 |
| b [mm] | 19 |
| da [mm] | 105 |
| d [mm] | 99 |
| L [mm] | 34 |
| E [mm] | 69 |
| c [mm] | 8 |
| ND [mm] | 32 |
| B H9 [mm] | 16 |
| Admissible MD [Ncm] | 2180 |
| Weight [g] | 160 |
Spur gear made of polyacetal resin die-cast with hub module 3 33 teeth tooth width 19mm outside diameter 105mm SKU: 28803300
Spur Gears Polyacetal Module 3
Spur gear made of polyacetal resin die-cast with hub module 3 33 teeth tooth width 19mm outside diameter 105mm SKU: 28803300
Material: Polyacetal resin die-cast.
Bores machined. Pressure angle 20°. With high hardness and low friction
coefficient these plastic gears can be used in various set-ups, even
under water.
Note Regarding the Machining
Inside these die-cast parts are some cavities caused by production.
These parts should therefore not be drilled too deep. With larger bores
or when grooving the cavities might become visible. This often does not
affect the functionality.
Description
Additional information
| Weight | 0.162 g |
|---|---|
| Dimensions | 105 × 34 × 105 cm |
